IoT-Based Control, Monitoring, and Protection System for 3-Phase Induction Motors in Electric Motorcycles

Main Article Content

Afrizal Abdi Musyafiq
Mohammad Hafiz Akbar
Purwiyanto Purwiyanto
Novita Asma Ilahi
Riyani Prima Dewi
Muhammad Fakhruriza Pradana

Abstract

This study investigates the application of the Internet of Things (IoT) for wireless control and monitoring of a 3-phase electric motor using a smartphone. The system integrates PZEM-004T, DS18B20, and Hall Effect sensors to collect data on voltage, current, temperature, and rotational speed using the NodeMCU ESP8266 microcontroller. Measurements are displayed on an LCD and transmitted to the Blynk server for smartphone access. A comparative method evaluates the accuracy of sensor readings against standard measuring instruments. Results obtained an average percentage error of 0.5% for the R phase voltage, 0.2% for the S phase, and 0.1% for the T phase. Current measurements reveal errors of 5% for the R phase, 10.3% for the S phase, and 11.7% for the T phase. The control system’s performance varies with internet speed, with an average delay of 0.99 seconds on a 4G network and 2.51 seconds on 3G. Additionally, the study evaluates three protection mechanisms, demonstrating that the motor stops within 4.03 seconds in the event of a phase failure, while overcurrent and overheating protections activate within 8.47 seconds and 3.64 seconds, respectively. Overall, the findings affirm the viability of IoT in motor monitoring and control, emphasizing accuracy and response times under varying conditions.

Article Details

How to Cite
[1]
“IoT-Based Control, Monitoring, and Protection System for 3-Phase Induction Motors in Electric Motorcycles”, PEC, vol. 1, no. 2, pp. 103–110, Nov. 2024, doi: 10.62777/pec.v1i2.32.
Section
Articles

How to Cite

[1]
“IoT-Based Control, Monitoring, and Protection System for 3-Phase Induction Motors in Electric Motorcycles”, PEC, vol. 1, no. 2, pp. 103–110, Nov. 2024, doi: 10.62777/pec.v1i2.32.

References

A. Pasta and M. Adensya, “Rancang Bangun Sistem Monitoring Daya Listrik Berbasis IoT Menggunakan ESP8266,” Akademi Manajemen Informatika dan Komputer Multi Data Palembang, 2019.

M. Sarifatullah, “Perancangan Sistem Proteksi Thermal pada Motor Induksi 3 Fasa Berbasis Kontrol Arduino Menggunakan Jaringan IoT,” Jurnal Online Mahasiswa (JOM) Bidang Teknik Elektro, vol. 1, no. 1, 2020.

S. Ashari, I. M. B. Sukmadana, and I. B. F. Citarsa, “Design of Three Phase Induction Motor Monitoring and Safety System Based on Microcontroller ATMega 8535,” Dielektrika, vol. 2, no. 2, pp. 123–130, 2015.

O. Y. Hutajulu, E. D. Suryanto, and D. H. Sinaga, “Implementasi Sistem Kontrol On/Off Pompa Air Sistem Tadon Berbasis Arduino untuk Penghematan Konsumsi Listrik Pompa,” Jurnal Teknik Informatika UNIKA Santo Thomas, vol. 4, no. 2, pp. 232–239, 2019.

Syarif Moh Rofiq Al- Ghony, Subuh Isnur Haryudo, and Jati Widyo Leksono, “Perancangan Sistem Otomatisasi Control Motor 3 Phase Menggunakan Bluetooth Berbasis Arduino Uno,” Reaktom : Rekayasa Keteknikan dan Optimasi, vol. 4, no. 2, pp. 50–55, Dec. 2019, https://doi.org/10.33752/reaktom.v4i2.1246. DOI: https://doi.org/10.33752/reaktom.v4i2.1246

H. Susanto and A. Hamzah, “Penerapan Konsep Internet of Things (IoT) Sebagai Monitoring Tegangan dan Arus pada Motor Induksi 1 Phase,” in Prosiding Seminar Nasional Aplikasi Sains & Teknologi 2018, 2018, pp. 261–270.

R. Syawali and S. Meliala, “IoT-Based Three-Phase Induction Motor Monitoring System,” Journal of Renewable Energy, Electrical, and Computer Engineering, vol. 3, no. 1, p. 12, Mar. 2023, https://doi.org/10.29103/jreece.v3i1.9811. DOI: https://doi.org/10.29103/jreece.v3i1.9811

A. Junaidi, “Internet of Things, Sejarah, Teknologi dan Penerapannya : Review,” Jurnal Ilmiah Teknologi Informasi Terapan, vol. 1, no. 3, pp. 62–66, 2015.

A. Wakhid, “Penerapan IoT dalam Rancang Bangun Sistem Proteksi Motor Induksi Tiga Fasa dari Gangguan Beban Lebih Berbasis Mikrokontroller,” Universitas Negeri Semarang, 2020.

M. Gawali, R. Bansode, V. Kamble, and M. Patted, “Iot Based Protection of Three Phase Induction Motor,” International Journal of Advances in Engineering and Management, vol. 2, no. 1, pp. 962–966, 2020.

M. Ioannides et al., “Design and Operation of Internet of Things-Based Monitoring Control System for Induction Machines,” Energies, vol. 16, no. 7, p. 3049, Mar. 2023, https://doi.org/10.3390/en16073049. DOI: https://doi.org/10.3390/en16073049

A. E. Salman, N. Y. Ahmed, and M. H. Saad, “Machine learning-based fault diagnosis for three-phase induction motors in ventilation systems,” Australian Journal of Mechanical Engineering, pp. 1–14, Dec. 2023, https://doi.org/10.1080/14484846.2023.2281027. DOI: https://doi.org/10.1080/14484846.2023.2281027

C. Prakash and S. Thakur, “Smart Shut-Down and Recovery Mechanism for Industrial Machines Using Internet of Things,” in 2018 8th International Conference on Cloud Computing, Data Science & Engineering (Confluence), IEEE, Jan. 2018, pp. 824–828. https://doi.org/10.1109/CONFLUENCE.2018.8442589. DOI: https://doi.org/10.1109/CONFLUENCE.2018.8442589

M. Sen and B. Kul, “IoT-based wireless induction motor monitoring,” in 2017 XXVI International Scientific Conference Electronics (ET), IEEE, Sep. 2017, pp. 1–5. https://doi.org/10.1109/ET.2017.8124386. DOI: https://doi.org/10.1109/ET.2017.8124386

R. D. Gomes, M. O. Adissi, T. A. B. da Silva, A. C. L. Filho, M. A. Spohn, and F. A. Belo, “Application of Wireless Sensor Networks Technology for Induction Motor Monitoring in Industrial Environments,” in Intelligent Environmental Sensing, vol. 13, Springer, Cham, 2015, pp. 227–277. https://doi.org/10.1007/978-3-319-12892-4_10. DOI: https://doi.org/10.1007/978-3-319-12892-4_10

G. Mamatha and A. H. Thejaswi, “Induction Motor Condition Monitoring and Controlling Based on IoT,” International Journal of Research in Engineering, Science and Management, vol. 4, no. 9, pp. 220–225, 2021.

M. A. H. Bin Roslan, N. H. M. Yunus, M. A. M. Azmi, J. Sampe, S. Y. M. Yassin, and T. A. T. Aziz, “Remote Controlling of Three-Phase Induction Motor Based on Auto Trans Starter with IoT Application,” in 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), IEEE, Jul. 2024, pp. 162–167. https://doi.org/10.1109/ICSIMA62563.2024.10675565. DOI: https://doi.org/10.1109/ICSIMA62563.2024.10675565

C. Pande, S. S. Thakur, and C. S. Sharma, “IoT Based 3 Phase Induction Motor Parameter Monitoring and Controlling,” J Emerg Technol Innov Res, vol. 8, no. 6, pp. e44–e53, 2021.

M. Shikhare, L. Kadam, D. Judpe, S. Pounikar, H. Waghmare, and S. D. Khadse, “Speed Control of 3 Phase Induction Motor Using VFD and IoT,” International Research Journal of Modernization in Engineering Technology and Science, vol. 5, no. 4, pp. 7034–7043, 2023.

S. E. Simonov, M. G. Gorodnichev, M. A. Ivanov, and I. E. Lyashenko, “Development of the IoT Device for Permanent Diagnostics of Electric Motors,” in 2024 Systems of Signals Generating and Processing in the Field of on Board Communications, IEEE, Mar. 2024, pp. 1–5. https://doi.org/10.1109/IEEECONF60226.2024.10496767. DOI: https://doi.org/10.1109/IEEECONF60226.2024.10496767