Vol. 2 No. 2 (2025)
Articles

Time Delay Compensation for the Superheated Steam Temperature Control System Based on a Practical Feedforward Gain-Scheduling Cascade Control Design with Stability Analysis

Tahereh Gholaminejad
K.N. Toosi University of Technology, Iran
Fereshteh Dadkhah-Tehrani
Mapna Electric and Control, Engineering and Manufacturing Company (MECO), Iran
Mohsen Maboodi
Mapna Electric and Control, Engineering and Manufacturing Company (MECO), Iran

Published 04-10-2025

Keywords

  • Superheated steam temperature,
  • Gain-scheduling control,
  • Feedforward control,
  • Particle swarm optimization,
  • Power increment

How to Cite

[1]
T. Gholaminejad, F. Dadkhah-Tehrani, and M. Maboodi, “Time Delay Compensation for the Superheated Steam Temperature Control System Based on a Practical Feedforward Gain-Scheduling Cascade Control Design with Stability Analysis”, PEC, vol. 2, no. 2, pp. 132–161, Oct. 2025, doi: 10.62777/pec.v2i2.46.

Abstract

Controlling the temperature of superheated steam (SST) is essential for the safe and efficient operation of combined cycle power plants, but it has become challenging due to frequent load variations and safety requirements. Traditional PI controllers may struggle to provide optimal performance because of non-linearity, time delays, and disturbances, particularly under wide-range load conditions. This paper proposes a new feedforward gain-scheduling cascade control strategy that compensates for time delays while ensuring stable SST without complicating the control system. The method incorporates a well-defined feedforward control mechanism into a gain-scheduling PI structure, enabling quick adjustments of the water spray control valve to prevent SST overshoots during sudden power fluctuations. A stability analysis is included, and the proposed strategy has been successfully simulated and implemented at two real combined cycle power plants in Iran, demonstrating its effectiveness in maintaining smooth temperature control and enhancing power output without adding complexity to the system.

References

  1. G. Shi, Z. Wu, J. Guo, D. Li, and Y. Ding, “Superheated Steam Temperature Control Based on a Hybrid Active Disturbance Rejection Control,” Energies (Basel), vol. 13, no. 7, p. 1757, Apr. 2020, doi: 10.3390/en13071757.
  2. Z. Wu, T. He, D. Li, Y. Xue, L. Sun, and L. Sun, “Superheated steam temperature control based on modified active disturbance rejection control,” Control Eng Pract, vol. 83, pp. 83–97, Feb. 2019, doi: 10.1016/j.conengprac.2018.09.027.
  3. J. Zhang, F. Zhang, M. Ren, G. Hou, and F. Fang, “Cascade control of superheated steam temperature with neuro-PID controller,” ISA Trans, vol. 51, no. 6, pp. 778–785, Nov. 2012, doi: 10.1016/j.isatra.2012.06.008.
  4. X.-F. Li, D.-J. Ding, Y.-G. Wang, and Z. Huang, “Cascade IMC-PID Control of Superheated Steam Temperature based on Closed-loop Identification in the Frequency Domain,” IFAC-PapersOnLine, vol. 49, no. 18, pp. 91–97, 2016, doi: 10.1016/j.ifacol.2016.10.145.
  5. Z. Wu, D. Li, and L. Wang, “Control of the superheated steam temperature: A comparison study between PID and fractional order PID controller,” in 2016 35th Chinese Control Conference (CCC), IEEE, Jul. 2016, pp. 10521–10526. doi: 10.1109/ChiCC.2016.7555024.
  6. N. Alamoodi and P. Daoutidis, “Nonlinear control of coal-fired steam power plants,” Control Eng Pract, vol. 60, pp. 63–75, Mar. 2017, doi: 10.1016/j.conengprac.2016.12.005.
  7. Z. Ma, H. Xu, and F. Dong, “Multi Model Robust PID Control of Main Steam Temperature based on Gap Metric,” IOP Conf Ser Earth Environ Sci, vol. 558, no. 5, p. 052074, Aug. 2020, doi: 10.1088/1755-1315/558/5/052074.
  8. G.-L. Wang, W.-W. Yan, S.-H. Chen, X. Zhang, and H.-H. Shao, “Multivariable constrained predictive control of main steam temperature in ultra-supercritical coal-fired power unit,” Journal of the Energy Institute, vol. 88, no. 2, pp. 181–187, May 2015, doi: 10.1016/j.joei.2014.06.003.
  9. X. Wu, J. Shen, Y. Li, and K. Y. Lee, “Fuzzy Modeling and Predictive Control of Power plant Steam Temperature System,” IFAC-PapersOnLine, vol. 48, no. 30, pp. 397–402, 2015, doi: 10.1016/j.ifacol.2015.12.411.
  10. H. Zhu et al., “Modelling and regulation of steam temperatures of a 1000‐MW double‐reheat boiler with long short‐term memory,” IET Control Theory & Applications, vol. 17, no. 16, pp. 2190–2204, Nov. 2023, doi: 10.1049/cth2.12535.
  11. L. Ma and K. Y. Lee, “Neural network based superheater steam temperature control for a large-scale supercritical boiler unit,” in 2011 IEEE Power and Energy Society General Meeting, IEEE, Jul. 2011, pp. 1–8. doi: 10.1109/PES.2011.6039231.
  12. H. Bushra, O. Fadul-Elmoula, Y. H.-E. Ibrahim, E. M. Hussein, and D. Mahmoud, “Superheated Steam Temperature Control using Fuzzy Logic Controller,” American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS), vol. 17, no. 1, pp. 34–41, 2016.
  13. X. Liu and X. Kong, “Nonlinear fuzzy model predictive iterative learning control for drum-type boiler–turbine system,” J Process Control, vol. 23, no. 8, pp. 1023–1040, Sep. 2013, doi: 10.1016/j.jprocont.2013.06.004.
  14. A. Sanchez-Lopez, G. Arroyo-Figueroa, and A. Villavicencio-Ramirez, “Advanced control algorithms for steam temperature regulation of thermal power plants,” International Journal of Electrical Power & Energy Systems, vol. 26, no. 10, pp. 779–785, Dec. 2004, doi: 10.1016/j.ijepes.2004.08.003.
  15. Xiang-Jie Liu and Ji-Zhen Liu, “Neuro-Fuzzy Generalized Predictive Control of Boiler Steam Temperature,” in 2006 6th World Congress on Intelligent Control and Automation, IEEE, 2006, pp. 6531–6535. doi: 10.1109/WCICA.2006.1714344.
  16. H. Kim, E. K. Kim, J. Kim, K. S. Lee, S. Kim, and Y. Han, “Prediction-based feedforward control of superheated steam temperature of a power plant,” International Journal of Electrical Power & Energy Systems, vol. 71, pp. 351–357, Oct. 2015, doi: 10.1016/j.ijepes.2015.03.022.
  17. Makeximu, M. Zhu, Y. Sun, Z. Wu, D. Li, and Y. Xue, “Active disturbance rejection control for boiler superheated steam temperature,” in 2016 16th International Conference on Control, Automation and Systems (ICCAS), IEEE, Oct. 2016, pp. 135–139. doi: 10.1109/ICCAS.2016.7832310.
  18. L. Sun, Q. Hua, J. Shen, Y. Xue, D. Li, and K. Y. Lee, “Multi-objective optimization for advanced superheater steam temperature control in a 300 MW power plant,” Appl Energy, vol. 208, pp. 592–606, Dec. 2017, doi: 10.1016/j.apenergy.2017.09.095.
  19. T. He, Z. Wu, D. Li, and J. Wang, “A Tuning Method of Active Disturbance Rejection Control for a Class of High-Order Processes,” IEEE Transactions on Industrial Electronics, vol. 67, no. 4, pp. 3191–3201, Apr. 2020, doi: 10.1109/TIE.2019.2908592.
  20. X. Li and X. Yu, “Robust regulation for superheated steam temperature control based on data-driven feedback compensation,” Appl Energy, vol. 325, p. 119918, Nov. 2022, doi: 10.1016/j.apenergy.2022.119918.
  21. S. Prasanth, S. Narayanan, N. Sivakumaran, and H. Pratheesh, “The control of superheater steam temperature in power plants using model predictive controller,” Computers and Electrical Engineering, vol. 115, p. 109109, Apr. 2024, doi: 10.1016/j.compeleceng.2024.109109.
  22. E. J. Adam and J. L. Marchetti, “Designing and tuning robust feedforward controllers,” Comput Chem Eng, vol. 28, no. 9, pp. 1899–1911, Aug. 2004, doi: 10.1016/j.compchemeng.2004.03.005.
  23. X. Cui et al., “PID Control of a Superheated Steam Temperature System Based on Integral Gain Scheduling,” Energies (Basel), vol. 15, no. 23, p. 8978, Nov. 2022, doi: 10.3390/en15238978.